SBX16M250
Catalog:
 |
 |
| Weight 27.00 lbs | EPA: 1.0 |
| View Large Photo | View Large Drawing |
SBX16M250 Part Numbers
Choose your complete part number based on your reflector choice
- SBX16M250T3/10 (type III)
- SBX16M250T5/10 (type V)
| Available Colors | |||||
| Color plates below represent available colors for this product. If photograph not available in selected color, color back plate will be shown. | |||||
 |
|||||
| 76 | |||||
| Available Accessories |
| House Side Shield for SBX16 Small Shoebox |
 |
| HSS12 House Side Shield for SBX16 Small Shoebox |
Description:
16" SHOEBOX-250MH- W/10" ARM
Features Include:
- Thick cast aluminum housing
- Heavy duty gauge extruded arm
- Hinged door frame*
- Clear tempered flat glass* Captive screws* Multi-tap ballast* Weatherproof silicone gasket
- Quartz Re-Strike Available
- Mogul Base Socket
- 4" Square Steel Poles Available
Accessories:
- House Side Shield for SBX16 Small Shoebox
General Specifications:
Heavy duty cast aluminum body.
Typical hardware will be stainless steal.
Ballast Information:
If required voltage cannot be determined, only the 277v lead will be pulled out of the fixture. All other line voltage wires will be left inside the fixture in order to prevent damage to the ballast due to incorrect power connections.
Standard Powder Coating Process
A polyester powder coat is used for superior gloss and color retention. State of the art 20 PSI pressure power wash at 140° incorporates five step iron phosphate process with sealer and DI water to cleanse and pre-treat the metal surface for maximum paint adhesion. Electrostatically applied ranging from texture to smooth glossy polyester powder topcoat and baked at 430° for maximum hardness and exterior durability.
All H.I.D. ballast will be high power factor except as noted. Typical H.I.D ballast will be multitap.
Photometric Data:
- IES: 20756 (click for IES data)